IP Address - Configuring Your Ethernet Router to Get Connected Fast

Many people are not aware that there are two types of IP address, an IP address that is used by a network and an IP address that is used by one computer. The difference is that an IP address that is used by a network refers to all computers on that network. An IP address that is used by one computer can be associated with a different subnet number than the one it is using. This is the reason why routers have IP addresses and why any two routers on the same network can share an IP address. Read on to know more.

IP Address - Why Do You Need To Configure Router

There are many reasons why you would need to configure a router and if you use the IP Address One reason is to connect two devices that may be of different sizes. This is called bridging. Another reason is for internal purposes. If you want your office network to contain several workstations connected then you would need to configure a router that uses a standard IP address and a port number as its subnet.

You should be aware that if you use standard IP addresses like and ports then all devices that are connected to these IP addresses and ports are treated like they are part of the same network. This means that when these devices send and receive data they will be using the same IP address and port. This is the main advantage of using a single network card, Ethernet adapter, and router with IP addresses and subnet masks. It allows all devices to be closely related and share the same resources.

Two classes of IP Address

There are two classes of IP address, an IP address that is used by a network and an IP address that is used by a single device. Usually, a network uses a standard subnet mask as a configuration format and all computers on a network share this similar subnet mask. 

The main difference between an IP subnet and a Static IP address is that a static IP address is allocated to a single server and all other computers on the network are connected to this server.

You should note that some routers are also configured using standard subnet masks but this is not usually the case for all of them. If you are unsure about your Routers and their IP address assignment you should contact the network provider and ask them.

Configuring IP Address

There are several things that you need to know about configuring Routers with different default router IP addresses The first thing that you need to know is what a default router is. A default router is any router that is found in a network and serves as the primary router which forwards packets to IP addresses on a specific network. The thing you need to configure for your router is its IP address or the IP address that is associated with a particular IP address i.e

Another thing that you need to know about configuring Routers is the meaning of a static IP address and a dynamic IP address. A static IP address is a set of IP addresses that will be used throughout the whole Internet while a dynamic IP address is an IP address that is assigned once and only once. The thing you need to do for configuring your router is to provide it with a static IP address a static subnet mask and a dynamic IP address that will be associated with an IP address of your own that is Once you have done these, you will be able to access the Internet using any of the IP-enabled devices.

Some of the popular wireless router manufacturers include Linksys, D-Link, Netgear, and many more. Several websites offer help in assigning the IP addresses of your choice for your computers with Routers. Once you have configured your new router, it is important to check the effectiveness of your internet connection. For this, it is important to make sure that there are no dropped or lost packets while you are accessing the internet. Some of the common factors that affect your internet connection include the number of people using the same net connection, the speed of your internet connection, and whether you have any wireless devices in your home.


The final configuration of your router involves naming your router with its MAC address. The meaning of this step is very simple, the name of your router will be the same as your primary network's MAC address. You can find the details of your router in the Network section and then go to the properties of your router. The other option would be to assign the LAN IP addresses and the other options can be used if you are looking for additional security.

VARIndia - Star Nite Awards
 POLLS   Placeholder image

    Adopting EDR

    SCADA level Security

    Empowering SOC

    Implementing XDR

    Implementing XDR

votes (%)

Adopting EDR = 0%
SCADA level Security = 0%
Empowering SOC = 80%
Implementing XDR = 20%
Implementing XDR = 0%

Copyright varindia.com @1999-2021 - All rights reserved.
Reproduction in whole or in part in any form or medium without express written permission of Kalinga Digital Media Pvt. Ltd. is prohibited.
Other Initiatives : www.mybrandbook.co.in | www.spoindia.org